Q. What is an Electric circuit?
A.
An electric circuit is an inter connection of electrical elements.
Q. What do you mean by independent and dependent sources?
A.
An ideal independent source is an active element that provides a
specified voltage or current that is completely independent of other
circuit variables where as an ideal dependent source is an active
element in which the source quantity is controlled by another voltage
or current.
Q. What are the types of dependent sources?
A.1.Voltage
controlled voltage source
2.
Current controlled voltage source
3.
Voltage controlled current source
4.
Current controlled current source
Q. Explain ohm’s law?
A.
At constant temperature, current flowing through an element is
directly proportional to the potential difference across it.
Q. What is open circuit and short circuit?
A.
An open circuit is a circuit element approaching infinite resistance
and short circuit is a circuit element with resistance approaching
zero.
Q. Define a branch, node, loop and mesh?
A.
Branch:
It represents a single element such as voltage source or resistor.
Node:
A node is the point of connection between two or more branches
Loop:
A loop is any closed path in a circuit
Mesh:
A mesh is a loop which does not contain any other loops in it.
Q. State kirchhoff’s laws?
A.
Kirchhoff’s
current law:
It states that algebraic sum of currents entering a node is zero.
i.e
Sum of currents entering a node=sum of currents leaving it.
Kirchhoff’s
voltage law:
It states that algebraic sum of voltages around a closed path or loop
is zero.
i.e
sum of voltage drops=sum of voltage rises.
Q. What is super node and super mesh?
A.
A super node is formed by enclosing a voltage source between two
non-reference nodes and any elements connected parallel with it. A
super mesh results when two meshes have a current source in common.
Q. Mesh analysis vs Nodal analysis?
A.
Mesh analysis is more useful when there are many series elements,
voltage sources and we have to find out branch or mesh currents.
Nodal
analysis is better if there are many parallel connected elements,
current sources and we have to find node voltages.
Q. Explain superposition principle?
A.
The superposition principle states that the voltage across (or
current through) an element in a linear circuit is the algebraic sum
of voltages across (or currents through) that element due to
independent sources acting alone.
Q. What is meant by source transformation?
A.
A source transformation is the process of replacing a voltage source
Vs.
in series with a resistor R by a current source is
in parallel with a resistor R, or vice versa.
Q. State thevenin’s theorem?
A.
Thevenin’s theorem states that a linear two terminal circuit can be
replaced by an equivalent circuit consisting of a voltage source VTH
in
series with a resistor RTH
where
VTH
is open circuit voltage at the terminals and RTH
is
the input or equivalent resistance at the terminals when the
independent sources are turned off.
Q. State Norton’s theorem?
A.
Norton’s theorem states that a linear two terminal circuit can be
replaced by an equivalent circuit consisting of a current source IN
in
parallel with a resistor RN
where
IN
is short circuit current through the terminals and RN
is
the input or equivalent resistance at the terminals when the
independent sources are turned off.
Q. State maximum power transfer theorem?
A.
Maximum power is transferred to the load when load resistance equals
thevenin resistance as seen from the load.
Q. Explain the behavior of capacitor and inductor to D.C?
A.
A capacitor acts as an open circuit to D.C
We
know that Q=CV
i=dQ/dt
i=CdV/dt
dV/dt
is zero in case of D.C supply. So current is zero which implies it
acts as an open circuit.
An
inductor acts as a short circuit to D.C
We
know that V=Ldi/dt
di/dt=0
in case of D.C supply. So, voltage across inductor is zero which
implies it acts as a short circuit.
Q. What are different parameters used to represent two port networks?
A.A
two port network can be modeled using six parameters
Impedance
(Z),Admittance (Y),Hybrid (h),Inverse hybrid (g),Transmission (T) and
Inverse transmission (t) parameters.
Comments
Post a Comment
Comment Policy
We’re eager to see your comment. However, Please Keep in mind that all comments are moderated manually by our human reviewers according to our comment policy, and all the links are nofollow. Using Keywords in the name field area is forbidden. Let’s enjoy a personal and evocative conversation.